Видео

Too presumptuous. 😏

Hi, thanks for the video! I know that it exist other parameters that are not listed in solidworks help documents and I m looking for exclude a part from the bom. Do you have any ideas on what would be the parameter for this? Thanks again!

Thank you friend❤❤

How to set spindle rpm higher than 12000rpm

great!

I'd love to see the video that was supposed to be before this.

wait! u cant leave us hanging there :O Generate some tool pathings!

is there a way to create a custom specialised tool? like dovetail chamfer tool

Great overview thanks! Can solidworks flow can simulate heat propagation through vias and/or copper planes through the PCB?

It works! 👌

12 years later and still very useful, thank you for the help.

Thank you for the video! But how can we know how the accurate are the results ? I mean, if I want to compare the stresses in nodes and in elements. What If we get some 30% - 40% difference ?

Thank you! I have a 4K monitor and the buttons were too small. Searching Solidworks website and forums did not solve this issue. Your video did.

Hello, Thank you for this super helpful video. A question: Is there a away with the dispatcher to rename the related drawing file with the SolidWorks file? Thank you

Outdated, even though the solution works so far that the icons that are too small are at normal size, the resolution suddenly changes (from 4k to not even HD).

First video to pop up in regards to resolution issues for 2023v on google search and did the trick for the necessary compatibility adaption, thanks for making this video!

bro is using an airplane microphone 🎤 😂

Thank you very much for a clear and useful tutorial

how do you keep beard hair from falling into the print? j/k

Thanks! The third method is really interesting. Quite usual that I need to perform reverse engineering of routing. So, I have a 2D drawing of a cable and need to issue assembly documentation with visualisation how the cable is placed. I can make a 3D model of cable. Place it later on the assembly with fixed length. And finally make routing that it will look good.

can you explain why you unchecked the required option while creating your length control

i dont have custom lenght ?

Great & good job. Thanks.

Can I create a table for different diameters, but using some Excel formula to automate the choice of length, or do I have to put an infinite number of length lines for each diameter? Ex.: -Cast Iron Flanged DN200, L= [250,500,700...] -Cast Iron Flanged DN250, L= [250,500,700...] or -Cast Iron Flanged DN200, L=250 -Cast Iron Flanged DN200, L=500 -Cast Iron Flanged DN200, L=700 -Cast Iron Flanged DN250, L=250 -Cast Iron Flanged DN250, L=500 -Cast Iron Flanged DN250, L=700

Thanks

This time it worked. Now I'll add 1x's and proceed with the entrance stairs with platforms that I need, and I also have a steel building coming up. Great video, Jordan. I didn't stick around for the Structural Systems. This is what I need. I have some ends that need massaging, like boards that go around hinges etc, but that will come later. Thanks again.

When I made my profile for the 2x4. I used the center rectangle and added radii on the corners, which is much more realistic. I can't add a screen capture nor add a file. I save my .sldlfp in a similar new Lumber folder with name DimLumber. sldlfp (for Dimensional Lumber, rather than "Structural". I get a warning: "This library feature part may (may? Does it or not!) contan feature that are not relate to the the selected features. Do you want to create a simplified library feature part that does not include unrelated features? Please note that this may cause rebuild errors in this libraray feature part. yes or no selection. What may cause rebuild errors? Creating a simplified LFP or keeping the un-related features? Who says that they are not related? I used them creating the sketch so they must be related in some way. Come on SW, give me some information to be able to make this decision! I chose no. I want the radii. I also took out the end point crossed construction lines and got the same error. Evidently what is not related is the radii.

Overall a great tutorial explaining the mold design process.Thanks.

For the love of God, why is Weldment Profiles so far down? Everything SW does has that convoluted path that drives me crazy. I just spent way too much time getting Pine 1x's and 2x's that I use regularly configured per your instructions. Evidently I missed something. My directory structure is somewhat different: Weldment profiles from locations in options is this: D:\PALLCDesignLIbrary\WeldmentProfiles, and DimLumber.SLDLFP ( Dimension Lumber instead of structural lumber) is here: ...D:\PALLCDesignLibrary\WeldmentProfiles\Structural Lumber. I guess I'll try GoE tech support to find the error. I have talked to you, Jordan, on tech support. You always told me more than I needed to know, and in this video you point out all the things that follow up, just like on the phone. I really appreciate that. I'll finish the video after I get the problem figured out. Great video!!

OMG, Awesome! Thanks for sharing!

brute forth method. thanks man. clear and concise. i know now how to calculate buoyancy. yeehaw

Link

Thanks for your great job!

Hi, thaks for video. Design study is grayed out for me, how can I activate it?

Why there is not bolt connection in the linear analysis

Pure Gold

It's worked for me!!! Thanks

Great man, You solve my issue in seconds, very grateful.

When I perform a weldment simulation using SolidWorks, the program recognizes one of the elements as solid and the other elements as beams. However, it does not allow me to change the solid element to a beam. How can I resolve this problem? And thank you for making like this informative videos

How to make Bundle for the routed 3 cables?

Wow thank you mam ❤

I want to kiss your head

If questions are still open, why when running preformance evaluations on the same unchanged assembly would i get different results in open times both for the assembly and some parts contained within it? Also if ive optimized tge graphics triagles as much as possible is that the end of the road to solving lagging issues?

hi can you please show how to create the maintainance loop in the solidworks

thank you Greg Buter

This video doesn't help...

It's a new feature. But the import problem still remains, and the cylinder is divided into 2 surfaces - which means that it is a problem to use MATES on this surface

This is way too fucking hard

Give me pdf

Great video! Thank You!